This product is awesome. Was a bit nervous that this adhesive would not allow the flexibility of a traditional mastic or mortar, but as long as you only lightly put in place until you are certain it is where you want it, it is easy to remove and adjust. Definitely recommend!
I experimented and went with this and I am very pleased with how easy it was to install and work with doing my kitchen backsplash. Would definitely recommend!
We used this for our backlash. It was a little difficult to place on the wall by the time we got to the end we figured it out. I really liked how you can place the tiles and readjust when needed. When we got up the next morning some of the tiles had slid down, but I think that’s because we didn’t press into place. We have used thinset Before in a previous project and wanted to try musselbound. We are very happy with the results!
Used this fantastic product to update an old mirror for my bathroom remodeling. Was able to attach decorative tile left over from my shower to make a complimentary mirror.
Backsplash installation. The product is waterproof barrier as well as eliminating a process and time waiting for the thin set to cure. Anytime tile needs to be installed on the wall I will definitely use this product!
This is the most awesome product. I have never put up tile in my LIFE and with this product I was able to install a beautiful subway tile backsplash. The job was not as messy as I had imagined and the tile looks amazing. Since I have no experience I have to give the credit for the amazing result to the products I used! This stuff is REALLY worth it’s weight in gold!
I loved the how much more convenience it brought to doing a backspash.
Very impressed with how easy it was to use this. We used it around our fireplace and it worked great!! Would never know we didn’t have mortar underneath the tile!
We wanted to tile the face of our fireplace and unfortunately, no one wanted to take on a small job so we decided to try this. Worst case scenario we rip it off and just keep waiting until we could find somebody. It was so easy! It adhered to our cement board no problem and it gave us the luxury of doing the project in segments because we weren’t working with something that dried. Have to say, we did an amazing job-our install looks better than our backsplash done with the same glass tile by a professional. Have used the fireplace many times and it has held up beautifully! Will definitely use this product again.
I don’t think I would use this for large areas but for small projects it is great.. I’m working on a van conversion and used it to adhere a stainless steel backsplash and a small (2′ x 4′) ceramic tile countertop in the galley. For the counter top I peeled the protective layer off in small sections at a time. Use a razor to cut the backing is necessary. The substrate is sanded pine plywood that I sealed with shellac which I think is important for good adhesion of the Mussel Bond. I used a porous backed ceramic tile for the counter, cleaned each tile well and also sealed the back of the tiles with shellac and got a very good bond to the Mussel Bond. For the stainless steel I cleaned the surface with alcohol. Again, I think good prep (as with all projects) is the key to success here.